INSTALL.ctl.md (1648B)
1 As you've seen, qmail has essentially no pre-compilation configuration. 2 You should never have to recompile it unless you want to change the 3 qmail home directory, usernames, or uids. 4 5 qmail does allow quite a bit of easy post-installation configuration. If 6 you care how your machine greets other machines via SMTP, for example, 7 you can put an appropriate line into /var/qmail/control/smtpgreeting. 8 9 But this is all optional -- if control/smtpgreeting doesn't exist, qmail 10 will do something reasonable by default. You shouldn't worry much about 11 configuration right now. You can always come back and tune things later. 12 13 There's one big exception. You MUST tell qmail your hostname. Just run 14 the config-fast script: 15 16 `# ./config-fast your.full.host.name` 17 18 config-fast puts your.full.host.name into control/me. It also puts it 19 into control/locals and control/rcpthosts, so that qmail will accept 20 mail for your.full.host.name. 21 22 You can instead use the config script, which looks up your host name in 23 DNS: 24 25 `# ./config` 26 27 config also looks up your local IP addresses in DNS to decide which 28 hosts to accept mail for. 29 30 (Why doesn't qmail do these lookups on the fly? This was a deliberate 31 design decision. qmail does all its local functions -- header rewriting, 32 checking if a recipient is local, etc. -- without talking to the network. 33 The point is that qmail can continue accepting and delivering local mail 34 even if your network connection goes down.) 35 36 Next, read through FAQ.md for information on setting up optional features 37 like masquerading. If you really want to learn right now what all the 38 configuration possibilities are, see qmail-control.0.